{{# var lang001 = {"ch": "模板名称", "en": "Template Name"}, lang002 = {"ch": "关联组", "en": "Bind AP Group"}, lang003 = {"ch": "射频配置", "en": "Radio Config"}, lang004 = {"ch": "射频", "en": "Radio"}, lang005 = {"ch": "开启|关闭", "en": "On|Off"}, lang006 = {"ch": "功率", "en": "Power"}, lang007 = {"ch": "信道", "en": "Channel"}, lang008 = {"ch": "不配置", "en": "Ignore"}, lang009 = {"ch": "模式", "en": "Mode"}, lang010 = {"ch": "SSID配置", "en": "SSID Config"}, lang011 = {"ch": "提示：SSID操作会默认删除AP已有SSID", "en": "Tip: SSID operation deletes existing AP SSIDs by default"}, lang012 = {"ch": "选择SSID", "en": "Select SSID"}, lang013 = {"ch": "新增SSID", "en": "Add New SSID"}, lang014 = {"ch": "SSID名称", "en": "SSID Name"}, lang015 = {"ch": "射频", "en": "Radio"}, lang016 = {"ch": "加密模式", "en": "Encrypt Mode"}, lang017 = {"ch": "SSID密码", "en": "SSID Pass"}, lang018 = {"ch": "隐藏", "en": "Hide"}, lang019 = {"ch": "操作", "en": "Action"}, lang020 = {"ch": "是|否", "en": "Yes|No"}, lang021 = {"ch": "该SSID已存在", "en": "SSID Exists"}, lang022 = {"ch": "该SSID添加重复", "en": "SSID Duplicated"}, lang023 = {"ch": "范围0-20，0表示不设置", "en": "Range 0-20, 0 means Ignore"}, lang024 = {"ch": "范围0-27，0表示不设置", "en": "Range 0-27, 0 means Ignore"}, lang025 = {"ch": "密码长度8~31位", "en": "Password Length 8-31"}, lang026 = {"ch": "当前未关联任何组", "en": "Not Linked to Any Group"}, lang027 = {"ch": "最多添加16个SSID", "en": "Max 16 SSIDs allowed"}, lang028 = {"ch": "5G射频的165信道无法与11AC-VHT80搭配", "en": "5GHz Ch 165 incompatible with 11AC-VHT80"}, lang029 = {"ch": "一个模板最多添加8个SSID", "en": "A template supports max 8 SSIDs"}, lang030 = {"ch": "每个射频最多添加8个SSID", "en": "Max 8 SSIDs per Radio"}, lang031 = {"ch": "确定要提交吗", "en": "Confirm Submit?"}, lang032 = {"ch": "AP属性配置", "en": "AP Attributes Config"}, lang033 = {"ch": "下联VLAN", "en": "Downlink VLAN"}, lang034 = {"ch": "为空表示不修改", "en": "Empty means no change."}, lang035 = {"ch": "派网云", "en": "Cloud"}, lang036 = {"ch": "不修改", "en": "No Change"}, lang037 = {"ch": "加入", "en": "Join"}, lang038 = {"ch": "不加入", "en": "Do Not Join"}, lang039 = {"ch": "SSID限速", "en": "SSID Rate Limit"}, lang040 = {"ch": "踢线阈值", "en": "Kickoff Threshold"}, lang041 = {"ch": "SSID总限速值<br>格式：上行/下行", "en": "Total SSID Limit<br>Format: Uplink/Downlink"}, lang042 = { "ch": "说明：终端低于该信号强度，则进行踢线操作<br>单位：dBm，数值为负数，0表示不限制", "en": "Kickoff if signal strength < threshold.<br>Unit: dBm (negative values). 0 means No Limit." }, lang043 = { "ch": "说明：终端低于该信号强度，拒绝接入SSID<br>单位：dBm，数值为负数，0表示不限制", "en": "Deny access if signal strength < threshold.<br>Unit: dBm (negative values). 0 means No Limit." }, lang044 = {"ch": "最大承载", "en": "Max Clients"}, lang045 = {"ch": "拒绝接入", "en": "Access Denied"}, lang046 = {"ch": "终端限速", "en": "Client Rate Limit"}, lang047 = { "ch": "针对AP下所有终端单独的限速；格式：上行限速 / 下行限速；单位：Mbps。", "en": "Per-client limit (AP scope). Format: Uplink/Downlink (Mbps)." }, lang048 = {"ch": "组播限速", "en": "Multicast Limit"}, lang049 = {"ch": "针对AP WAN口组播包进行限速", "en": "Limit multicast packets on AP WAN port."}, lang050 = {"ch": "密码不能为空", "en": "Password cannot be empty."}, lang051 = {"ch": "仅支持中英文空格~!@#^*_+{}[]$等字符", "en": "Supports English/Chinese, space, and symbols (~!@#^*_+{}[]$)"},     lang052 = {"ch": "范围：0或者3 ~ 4094", "en": "Range: 0 or 3 to 4094"};     var l_parent_data = {         grp: d.grp || [],         action: d.action || 'add_sac_tmpl'     }; }}  <style> .paui-sactmpl-form-desc{padding-top: 4px;} </style>  <form class="layui-form paui-tmpl-add" lay-filter="form_sac_addtmpl" style="margin-top:10px">     <div class="layui-card">         <div class="layui-card-body">             <div class="layui-row">                 <div class="layui-col-xs2 paui-sactmpl-form-desc">{{ lang001[g_lang] || "模板名称" }}</div>                 <div class="layui-col-xs2" style="width: 200px;">                     <input type="hidden" name="action" value="add_sac_tmpl">                     <input type="hidden" name="tmpl_id">                     <input type="text" name="tmpl_name" lay-verify="required|isName"                     lay-vertype="tips" id="ipt_tmpl_name" class="layui-input">                 </div>             </div>         </div>     </div>     <div class="layui-card" id="paui-sac-tmplgroup-box" style="display:none">         <div class="layui-row">             <div class="layui-col-xs12">                 <fieldset class="layui-elem-field layui-field-title">                     <legend>{{ lang002[g_lang] || "关联组" }}</legend>                 </fieldset>             </div>         </div>         <div class="layui-card-body">             <div class="layui-row layui-col-space10" id="paui-sac-tmplgroup-body">             </div>         </div>     </div>     <div class="layui-card">         <div class="layui-row">             <div class="layui-col-xs12">                 <fieldset class="layui-elem-field layui-field-title">                     <legend>{{ lang032[g_lang] || "AP属性配置" }}</legend>                 </fieldset>             </div>         </div>         <div class="layui-card-body">             <div class="layui-row">                 <div class="layui-col-xs2 paui-sactmpl-form-desc">{{ lang033[g_lang] || "下联VLAN" }}</div>                 <div class="layui-col-xs2" style="width: 200px; margin-right: 10px;">                     <input type="text" name="lanvlan" class="layui-input" placeholder="为空表示不修改" lay-verify="number|is_vlan">                 </div>                 <div class="layui-form-mid layui-word-aux">{{ lang052[g_lang] || "范围：0或者3 ~ 4094" }}</div>             </div>             <div class="layui-row" style="margin-top:10px;">                 <div class="layui-col-xs2 paui-sactmpl-form-desc">{{ lang035[g_lang] || "派网云" }}</div>                 <div class="layui-col-xs2" style="width: 200px;">                     <select name="cloudsw">                         <option value="">{{ lang036[g_lang] || "不修改" }}</option>                         <option value="1">{{ lang037[g_lang] || "加入" }}</option>                         <option value="0">{{ lang038[g_lang] || "不加入" }}</option>                     </select>                 </div>             </div>             <div class="layui-row" style="margin-top:10px;">                 <div class="layui-col-xs2 paui-sactmpl-form-desc">{{ lang048[g_lang] || "组播限速" }}</div>                 <div class="layui-col-xs10">                     <div class="layui-input-inline" style="width: 95px;">                         <input type="text" name="mca_tx" class="layui-input" value="0" lay-verif="required|number">                     </div>                     <div class="layui-input-inline"> / </div>                     <div class="layui-input-inline" style="width: 95px;">                         <input type="text" name="mca_rx" class="layui-input" value="0" lay-verify="required|number">                     </div>                     <div class="layui-input-inline layui-word-aux">                         {{ lang049[g_lang] || "针对AP WAN口组播包进行限速" }}                     </div>                 </div>             </div>         </div>     </div>     <div class="layui-card">         <div class="layui-row">             <div class="layui-col-xs12">                 <fieldset class="layui-elem-field layui-field-title">                     <legend>{{ lang003[g_lang] || "射频配置" }}</legend>                 </fieldset>             </div>         </div>         <div class="layui-card-body">             <div class="layui-row" style="width: 900px;">                 <div class="layui-col-xs1 paui-sactmpl-form-desc">2GHz</div>                 <div class="layui-col-xs1 paui-sactmpl-form-desc" style="text-align:right">{{ lang004[g_lang] || "射频" }}&nbsp;&nbsp;</div>                 <div class="layui-col-xs1">                     <input type="checkbox" name="2g_up" lay-skin="switch" lay-text='{{ lang005[g_lang] || "开启|关闭" }}'>                 </div>                 <div class="layui-col-xs1 paui-sactmpl-form-desc" style="text-align:right">{{ lang006[g_lang] || "功率" }}&nbsp;&nbsp;</div>                 <div class="layui-col-xs1">                     <input type="text" name="2g_txpwr" placeholder="1-20" value=0 class="layui-input" lay-verify="required|is_pwr1" lay-vertype="tips">                 </div>                 <div class="layui-col-xs1 paui-sactmpl-form-desc" style="text-align:right">{{ lang007[g_lang] || "信道" }}&nbsp;&nbsp;</div>                 <div class="layui-col-xs2">                     <select name="2g_channel" lay-search>                         <option value="0">{{ lang008[g_lang] || "不配置" }}</option>                         <option value="1">1</option>                         <option value="2">2</option>                         <option value="3">3</option>                         <option value="4">4</option>                         <option value="5">5</option>                         <option value="6">6</option>                         <option value="7">7</option>                         <option value="8">8</option>                         <option value="9">9</option>                         <option value="10">10</option>                         <option value="11">11</option>                         <option value="12">12</option>                         <option value="13">13</option>                     </select>                 </div>                 <div class="layui-col-xs1 paui-sactmpl-form-desc" style="text-align:right">{{ lang009[g_lang] || "模式" }}&nbsp;&nbsp;</div>                 <div class="layui-col-xs3 select_2g_phymode" style="width:240px"></div>             </div>             <div class="layui-row" style="width: 900px; margin-top:10px;">                 <div class="layui-col-xs1 paui-sactmpl-form-desc">5GHz</div>                 <div class="layui-col-xs1 paui-sactmpl-form-desc" style="text-align:right">{{ lang004[g_lang] || "射频" }}&nbsp;&nbsp;</div>                 <div class="layui-col-xs1">                     <input type="checkbox" name="5g_up" lay-skin="switch" lay-text='{{ lang005[g_lang] || "开启|关闭" }}'>                 </div>                 <div class="layui-col-xs1 paui-sactmpl-form-desc" style="text-align:right">{{ lang006[g_lang] || "功率" }}&nbsp;&nbsp;</div>                 <div class="layui-col-xs1">                     <input type="text" name="5g_txpwr" placeholder="1-27" class="layui-input" value=0 lay-verify="required|is_pwr2" lay-vertype="tips">                 </div>                 <div class="layui-col-xs1 paui-sactmpl-form-desc" style="text-align:right">{{ lang007[g_lang] || "信道" }}&nbsp;&nbsp;</div>                 <div class="layui-col-xs2">                     <select name="5g_channel" lay-search>                         <option value="0">{{ lang008[g_lang] || "不配置" }}</option>                         <option value="36">36</option>                         <option value="40">40</option>                         <option value="44">44</option>                         <option value="48">48</option>                         <option value="52">52</option>                         <option value="56">56</option>                         <option value="60">60</option>                         <option value="64">64</option>                         <option value="149">149</option>                         <option value="153">153</option>                         <option value="157">157</option>                         <option value="161">161</option>                         <option value="165">165</option>                     </select>                 </div>                 <div class="layui-col-xs1 paui-sactmpl-form-desc" style="text-align:right">{{ lang009[g_lang] || "模式" }}&nbsp;&nbsp;</div>                 <div class="layui-col-xs3 select_5g_phymode" style="width:240px"></div>             </div>         </div>     </div>      <div class="layui-card">         <div class="layui-row">             <div class="layui-col-xs12">                 <fieldset class="layui-elem-field layui-field-title">                     <legend>{{ lang010[g_lang] || "SSID配置" }}</legend>                 </fieldset>             </div>         </div>         <div class="layui-card-body" style="margin-right:20px">              <div class="layui-row">                 <div class="layui-col-xs7" style="color:#999999">                     {{ lang011[g_lang] || "提示：SSID操作会默认删除AP已有SSID" }}                 </div>                 <div class="layui-col-xs5" style="text-align:right">                     <span class="abtn" id="btn_select_ssid">                         <i class="layui-icon layui-icon-search"></i>{{ lang012[g_lang] || "选择SSID" }}                     </span>                     &nbsp;&nbsp;                     <span class="abtn" id="btn_add_ssid">                         <i class="layui-icon layui-icon-add-1"></i>{{ lang013[g_lang] || "新增SSID" }}                     </span>                 </div>             </div>             <div class="layui-row" style="margin-top:10px">                 <table class="layui-table" id="tab_add_ssid" style="width:100%" lay-skin="line" lay-size="sm">                     <thead>                         <tr>                             <td style="width:20%">{{ lang014[g_lang] || "SSID名称" }}</td>                             <td style="width:12%">{{ lang015[g_lang] || "射频" }}</td>                             <td style="width:12%">{{ lang016[g_lang] || "加密模式" }}</td>                             <td style="width:20%">{{ lang017[g_lang] || "SSID密码" }}</td>                             <td style="width:10%">VLAN</td>                             <td style="width:12%">{{ lang044[g_lang] || "最大承载" }}</td>                             <td style="width:6%">{{ lang018[g_lang] || "隐藏" }}</td>                             <td style="width:8%;text-align:right;">{{ lang019[g_lang] || "操作" }}</td>                         </tr>                     </thead>                     <tbody></tbody>                 </table>             </div>         </div>     </div>      <div class="layui-row layui-hide">         <div class="layui-col-xs12">             <button lay-submit id="submit_addtmpl" lay-filter="submit_addtmpl"></button>              </div>     </div> </form>  <!--添加编辑模板--> <script id="tpl_add_ssid" type="text/html">     <tr>         <td>             <input type="text" name="ssidName_{% d.num %}" value="{% d.name %}"             class="layui-input" lay-verify="required|isName|is_ssidname" lay-vertype="tips">         </td>         <td>             <select name="ssidRidx_{% d.num %}">                 {%#  if(d.ridx == "0"){ %}                     <option value="0" selected>2GHz</option>                     <option value="1">5GHz</option>                 {%#  } else { %}                     <option value="0">2GHz</option>                     <option value="1" selected>5GHz</option>                 {%#  } %}               </select>         </td>         <td>             <select name="ssidAmode_{% d.num %}" lay-filter="select_ssidamode">                 {%#  if(d.amode == "open"){ %}                     <option value="open" selected>Open</option>                     <option value="wpa2-psk">WPA2-PSK</option>                     <option value="wpa3-ase">WPA3-SAE</option>                 {%#  } else if(d.amode == "wpa2-psk") { %}                     <option value="open">Open</option>                     <option value="wpa2-psk" selected>WPA2-PSK</option>                     <option value="wpa3-ase">WPA3-SAE</option>                 {%#  } else if(d.amode == "wpa3-ase") { %}                     <option value="open">Open</option>                     <option value="wpa2-psk">WPA2-PSK</option>                     <option value="wpa3-ase" selected>WPA3-SAE</option>                 {%#  } %}                    </select>         </td>         <td>             <input type="text" name="ssidKey_{% d.num %}" value="{% d.key %}"             lay-verify="is_password" lay-vertype="tips" class="layui-input paui-tmpl-ssidkey">         </td>         <td>             <input type="text" name="ssidVlan_{% d.num %}" value="{% d.vlan %}"             lay-verify="required|is_vlan" lay-vertype="tips" class="layui-input">         </td>         <td>             <input type="text" name="ssidMaxonline_{% d.num %}" value="{% d.maxonline || 127 %}"             lay-verify="required" lay-vertype="tips" class="layui-input">         </td>         <td>             <input type="checkbox" name="ssidHide_{% d.num %}"             lay-skin="switch" lay-text='{{ lang020[g_lang] || "是|否" }}' {% d.hide == "1" ? 'checked' : '' %}>         </td>         <td align="right">             <span class="abtn btn_tmpl_ssid_del">                 <i class="layui-icon layui-icon-delete"></i>             </span>         </td>     </tr> </script>  <!--选择已有SSID模板--> <script id="tpl_select_ssid" type="text/html">     <tr>         <td><input type="text" name="ssidName_{% d.num %}" value="{% d.name %}" readonly class="layui-input layui-disabled"></td>         <td>             <select name="ssidRidx_{% d.num %}">                 {%#  if(d.ridx == "0"){ %}                     <option value="0" selected>2GHz</option>                     <option value="1">5GHz</option>                 {%#  } else { %}                     <option value="0">2GHz</option>                     <option value="1" selected>5GHz</option>                 {%#  } %}               </select>         </td>         <td>             <select name="ssidAmode_{% d.num %}" disabled class="layui-disabled">                 {%#  if(d.amode == "open"){ %}                     <option value="open" selected>Open</option>                     <option value="wpa2-psk">WPA2-PSK</option>                     <option value="wpa3-ase">WPA3-SAE</option>                 {%#  } else if(d.amode == "wpa2-psk") { %}                     <option value="open">Open</option>                     <option value="wpa2-psk" selected>WPA2-PSK</option>                     <option value="wpa3-ase">WPA3-SAE</option>                 {%#  } else if(d.amode == "wpa3-ase") { %}                     <option value="open">Open</option>                     <option value="wpa2-psk">WPA2-PSK</option>                     <option value="wpa3-ase" selected>WPA3-SAE</option>                 {%#  } %}                        </select>         </td>         <td>             <input type="text" name="ssidKey_{% d.num %}" value="{% d.key %}" readonly class="layui-input layui-disabled">         </td>         <td>             <input type="text" name="ssidVlan_{% d.num %}" value="{% d.vlan || '0' %}" readonly class="layui-input layui-disabled">         </td>         <td>             <input type="text" name="ssidMaxonline_{% d.num %}" value="{% d.maxonline || 127 %}" readonly             lay-verify="required" lay-vertype="tips" class="layui-input layui-disabled">         </td>         <td>             <input type="checkbox" name="ssidHide_{% d.num %}" disabled lay-skin="switch"             lay-text='{{ lang020[g_lang] || "是|否" }}' {% d.hide == "1" ? 'checked' : '' %}>         </td>         <td align="right">             <span class="abtn btn_tmpl_ssid_copy" num="{% d.num %}">                 <i class="layui-icon layui-icon-templeate-1"></i>             </span>             <span class="abtn btn_tmpl_ssid_del">                 <i class="layui-icon layui-icon-delete"></i>             </span>         </td>     </tr> </script>  <!--SSID选择--> <script id="tpl_sac_ssidlist" type="text/html">     <div class="layui-card" style="margin: 10px">         <div class="layui-row">             <table id="tab_ssidlist" lay-filter="tab_ssidlist"></table>         </div>     </div> </script>  <script> layui.use(function(){     var $ = layui.$,     form = layui.form,     patpl = layui.patpl,     table = layui.table;      var api = "/cgi-bin/sac/ajax_sac_tmpl";     var pa_table = new Paui_table();      var l_ssidList = [];     var select_2g_phymode, select_5g_phymode;     var l_parent_data = JSON.parse('{{- JSON.stringify(l_parent_data) }}');       form.verify({         is_ssidname: function(value, item){             for(var i = 0; i < l_ssidList.length; i++){                 if(l_ssidList[i].ssidname == value)                     return '{{ lang021[g_lang] || "该SSID已存在" }}';             }                          var num = 0;             var index = $(item).attr("name").split("_")[1];                          var tdname = "", tdvlan = "", tdtype = "", cmpstr = "";              _vlan = $(item).parent().parent().find("input[name='ssidVlan_"+index+"']").val();             _type = $(item).parent().parent().find("select[name='ssidRidx_"+index+"']").val();             value = value + _vlan + _type;              for(var i = 1; i <= $("#tab_add_ssid tbody tr").length; i++) {                 tdname = $("input[name='ssidName_"+i+"']").val();                 tdvlan = $("input[name='ssidVlan_"+i+"']").val();                 tdtype = $("select[name='ssidRidx_"+i+"']").val();                 cmpstr = tdname + tdvlan + tdtype;                                  if( value == cmpstr ) num++;             }             if (num>1) return '{{ lang022[g_lang] || "该SSID添加重复" }}';         }         ,is_pwr1: function(value, item){             if (value < 0 || value > 20)                 return '{{ lang023[g_lang] || "范围0-20，0表示不设置" }}';         }         ,is_pwr2: function(value, item){             if (value < 0 || value > 27)                 return '{{ lang024[g_lang] || "范围0-27，0表示不设置" }}';         }         ,is_vlan: function(value, item){             if (value < 0 || value == 1 || value == 2 || value > 4094)                 return "VLAN ID(0 or 3-4094)";         }         ,is_rate: function(value, item){             var val = value.split("/");             if(val.length != 2)                 return '{{ lang041[g_lang] || "SSID总限速值<br>格式：上行/下行" }}';             if(!IsDigit(val[0]) || !IsDigit(val[1]))                 return '{{ lang041[g_lang] || "SSID总限速值<br>格式：上行/下行" }}';         }         ,is_password: function(value, item){             var num = item.getAttribute("name").split("_")[1];             var amode = form.val("form_sac_addtmpl")["ssidAmode_"+num];             if(amode != "open") {                 if (value == "") return '{{ lang050[g_lang] || "密码不能为空" }}';                 if (value.length < 8 || value.length > 31)                     return  '{{ lang025[g_lang] || "密码长度8~31位" }}';                 var rule = /^[a-zA-Z0-9\u4e00-\u9fa5#,. ~!@#^*_+\{\}\[\]\$]+$/u;                 if (!rule.test(value))                     return '{{ lang051[g_lang] || "仅支持中英文空格~!@#^*_+{}[]$等字符" }}';             }         }     });       var render_page_data = function(r) {         var cmd = "";         var key = "";         var val = "";         var ssid_num = 1;         var phy_2g = [];         var phy_5g = [];         var cmdArry = r.tmplcmd.split(";");          /* show bind group */         $("#paui-sac-tmplgroup-box").show();         if(l_parent_data.grp.length == 0)             $("#paui-sac-tmplgroup-body").append('<div class="layui-col-xs3 paui-color-disable">{{ lang026[g_lang] || "当前未关联任何组" }}</div>');          else {             layui.each(l_parent_data.grp, function(index, elem){                 $("#paui-sac-tmplgroup-body").append('<div class="paui-label paui-color-normal">'+ elem.grpname +'</div>');             });         }          /* init value */         for (var i = 0; i < cmdArry.length; i++){                          if(cmdArry[i] == "") continue;             cmd = cmdArry[i].split("&");              switch(cmd[1]){                 case "reload":                     continue;                     break;                                  case "cloudsw":                     form.val('form_sac_addtmpl', {                         cloudsw: cmd[2].split("=")[1]                     });                     break;                  case "lanvlan":                     form.val('form_sac_addtmpl', {                         lanvlan: cmd[2].split("=")[1]                     });                     break;                  case "modrd":                     if(cmd[2] == "ridx=0") {                         for(var x = 3; x < cmd.length; x++){                             key = cmd[x].split("=")[0];                             val = cmd[x].split("=")[1];                             if(key == "channel") $("select[name='2g_channel']").val(val);                             else if(key == "up")      $("input[name='2g_up']")[0].checked = val == 0 ? false : true;                             else if(key == "txpwr")   $("input[name='2g_txpwr']").val(val);                             else if(key == "phymode") phy_2g.push(val);                         }                         select_2g_phymode.setValue(phy_2g);                     } else if(cmd[2] == "ridx=1") {                         for(var x = 3; x < cmd.length; x++){                             key = cmd[x].split("=")[0];                             val = cmd[x].split("=")[1];                             if(key == "channel") $("select[name='5g_channel']").val(val);                             else if(key == "up")      $("input[name='5g_up']")[0].checked = val == 0 ? false : true;                             else if(key == "txpwr")   $("input[name='5g_txpwr']").val(val);                             else if(key == "phymode") phy_5g.push(val);                         }                         select_5g_phymode.setValue(phy_5g);                     }                     break;                  case "addwlan":                     var d = {};                     if (cmd.length < 7) continue;                     d.ridx  = cmd[2].split("=")[1];                     d.name  = cmd[3].split("=")[1].replace("#", " ");                     d.amode = cmd[4].split("=")[1];                     d.key   = cmd[5].split("=")[1];                     d.vlan  = cmd[6].split("=")[1];                     d.hide  = cmd[7].split("=")[1];                      if(cmd.length > 9)                         d.maxonline = cmd[9].split("=")[1];                      d.num   = ssid_num++;                     d.name = d.name.replaceAll("'", "");                     tmpltab_add_ssid(d, "select");                     break;                  case "modwlan":                     var d = {};                     var ssid = ssid_num - 1;                     form.val('form_sac_addtmpl', d);                     break;                                  case "setifrate":                     if(cmd[2] == "src=eth") {   /* 组播限速 */                         form.val('form_sac_addtmpl', {                             mca_tx: cmd[4] ? cmd[4].split("=")[1] : 0,                             mca_rx: cmd[5] ? cmd[5].split("=")[1] : 0                         });                     } else {    /* SSID限速 */                         var d = {};                         var ssid = ssid_num - 1;                         form.val('form_sac_addtmpl', d);                     }                     break;             }         }          form.val("form_sac_addtmpl", {             "action": "edit_sac_tmpl",             "tmpl_id": r.tmplid,             "tmpl_name": r.tmplname,         });     };       var btn_select_ssid = function() {         paopen({             title: '选择SSID'             ,area: ['420px', '480px']             ,btn: "default"             ,content: $("#tpl_sac_ssidlist").html()             ,btn1: function(index, layero){                 var grpid = "";                 var exist = 0;                 var d = {};                 var s = {};                 var checkStatus = table.checkStatus('tab_ssidlist');                 for(var i = 0; i < checkStatus.data.length; i++) {                     exist = 0;                     s = checkStatus.data[i];                     d = {                         "ridx": 0,                         "name": s.ssidname,                         "hide": s.hide,                         "vlan": s.vlan,                         "key": s.pwd == "null" ? "" : encodeURIComponent(s.pwd),                         "amode": s.mode == 0 ? "open" : "wpa2-psk",                         "rate": s.intf_tx + "/" + s.intf_rx,                         "kick": s.kick                     };                     d.num = $("#tab_add_ssid tbody tr").length + 1;                     if(d.num > 16) continue;                     for(var x = 1; x < d.num; x++) {                         if(d.name == $("input[name='ssidName_"+x+"']").val())                             exist=1                     }                     if(exist==1) continue;                     tmpltab_add_ssid(d, "select");                 }                 layer.close(index);             }             ,success: function(layero, index){                 pa_table.render({                     elem: '#tab_ssidlist'                     ,lang: g_lang                     ,url: "/cgi-bin/sac/ajax_sac_ssid"                     ,where: {"action": "load_ssid_list"}                     ,cols: [[                         {type:'checkbox'}                         ,{field: 'ssidname', title:'SSID名称'}                         ,{field: 'vlan', title:'VLAN'}                     ]]                 });1343             }         });     };       var tmpltab_add_ssid = function(src, type){         var d = {};         if( src == "") {             d = {"name": "", "key": "", "amode": "wpa2-psk", "ridx": 0, "hide": "", "vlan": 0};             d.num = $("#tab_add_ssid tbody tr").length + 1;         } else              d = src;          if(d.num > 16){             alert_tips('{{ lang027[g_lang] || "最多添加16个SSID" }}');             return false;         }          var TMPL = type == "select" ? "#tpl_select_ssid" : "#tpl_add_ssid";          patpl($(TMPL).html()).render(d, function(html){             $("#tab_add_ssid tbody").append(html);         });                  form.render();                  $(".btn_tmpl_ssid_del").off("click");         $(".btn_tmpl_ssid_del").on("click", add_ssid_del);          $(".btn_tmpl_ssid_copy").off("click");         $(".btn_tmpl_ssid_copy").on("click", add_ssid_copy)     };       var add_ssid_del = function() {         $(this).parents("tr").remove();          var curow = $("#tab_add_ssid tbody tr").length;         for(var i = 0; i < curow; i++){             var obj_tr = $("#tab_add_ssid tbody tr").eq(i);             for(var x = 0; x < $(obj_tr).find("input").length; x++){                 var ipt = $(obj_tr).find("input").eq(x);                 if(ipt.attr("name") == undefined) continue;                 var new_name =ipt.attr("name").split("_")[0] + "_" + ( i + 1);                 ipt.attr("name", new_name);             }             for(var x = 0; x < $(obj_tr).find("select").length; x++){                 var sel = $(obj_tr).find("select").eq(x);                 if(sel.attr("name") == undefined) continue;                 var new_name =sel.attr("name").split("_")[0] + "_" + ( i + 1);                 sel.attr("name", new_name);             }         }     };       var add_ssid_copy = function(){         var num = $(this).attr("num");         var r = form.getValue("form_sac_addtmpl");         var index = $("#tab_add_ssid tbody tr").length;          var d = {             "name": r["ssidName_"+num] + "_copy",             "key": r["ssidKey_"+num],             "amode": r["ssidAmode_"+num],             "ridx": r["ssidRidx_"+num],             "hide": r.hasOwnProperty("ssidHide_"+num) ? 1 : 0,             "vlan": r["ssidVlan_"+num],             "num": index + 1,         };          tmpltab_add_ssid(d, "add");     };       var addtmpl_submit = function(r){         /*         pappiw lanvlan vlan=N         pappiw cloudsw sw=0/1         pappiw addwlan ridx=射频ID widx=WLAN编号 ssid=SSID名称 amode=认证模式key=SSID密码 vlan=VLAN号 hide=是否隐藏SSID         pappiw modrd ridx=射频ID channel=信道 txpwr=功率 phymode=模式 up=射频开关         每行pappiw, 以;分割，最后必须添加 pappiw reload;         & 在URL中，有特殊含义，所以使用 > 代替 &， 在后端将 > 还原成 &;         */          var phy_2g = select_2g_phymode.getValue();         var phy_5g = select_5g_phymode.getValue();          var phy_2g1 = phy_2g.length >= 1 ? phy_2g[0].value : "";         var phy_2g2 = phy_2g.length == 2 ? phy_2g[1].value : "";         var phy_5g1 = phy_5g.length >= 1 ? phy_5g[0].value : "";         var phy_5g2 = phy_5g.length == 2 ? phy_5g[1].value : "";          if(r["5g_channel"] == "165" && phy_5g1 == "11ac_vht80" || phy_5g2 == "11ac_vht80"){             alert_tips('{{ lang028[g_lang] || "5G射频的165信道无法与11AC-VHT80搭配" }}');             return false;         }          var wlanid_2g = 0;         var wlanid_5g = 0;         var cmdstr = "";         var ssidLen = $("#tab_add_ssid tbody tr").length;          /* SSID; */         if(ssidLen != 0)              cmdstr += ";pappiw>clearwlan";                  if(ssidLen > 8) {             alert_tips('{{ lang029[g_lang] || "一个模板最多添加8个SSID" }}');             return false;         }          for(var x = 0; x < ssidLen; x++){             var num = x + 1;             var _ssid = r["ssidName_"+num];             var _amode = r["ssidAmode_"+num];             var _ridx = r["ssidRidx_"+num];             var _key = r["ssidKey_"+num];             var _vlan = r["ssidVlan_"+num];             var _maxonline = r["ssidMaxonline_"+num];             var _hide = r.hasOwnProperty("ssidHide_"+num) ? 1 : 0;             var _wlanid = ( _ridx == 0 ) ? wlanid_2g++ : wlanid_5g++;              if(_wlanid < 0){                 alert_tips('{{ lang030[g_lang] || "每个射频最多添加8个SSID" }}');                 return false;             }              cmdstr += [                 ";pappiw>addwlan>ridx=", _ridx,                 ">ssid=\\'", _ssid,                 "\\'>amode=", _amode,                 ">key=", _key,                  ">vlan=", _vlan,                 ">hide=", _hide,                  ">widx=", _wlanid,                 ">maxsta=", _maxonline,             ].join('');              cmdstr += [                 ";pappiw>modwlan>ridx=", _ridx,                 ">widx=", _wlanid             ].join('');         }          /* 2G 射频 */         cmdstr += ";pappiw>modrd>ridx=0";                  if(r["2g_channel"] != "0")             cmdstr += ">channel="+r["2g_channel"];                  if(phy_2g1 != "" && phy_2g1 != "auto")             cmdstr += ">phymode=" + phy_2g1;          if(phy_2g2 != "" && phy_2g2 != "auto")             cmdstr += ">phymode=" + phy_2g2;          cmdstr += ">up=" + (r["2g_up"] ? 1 : 0);                  if(r["2g_txpwr"] != "0")             cmdstr += ">txpwr="+r["2g_txpwr"];          /* 5G 射频 */         cmdstr += ";pappiw>modrd>ridx=1";                  if(r["5g_channel"] != "0")             cmdstr += ">channel="+r["5g_channel"];          if(phy_5g1 != "" && phy_5g1 != "auto")             cmdstr += ">phymode=" + phy_5g1;                      if(phy_5g2 != "" && phy_5g2 != "auto")             cmdstr += ">phymode=" + phy_5g2;          cmdstr += ">up=" + (r["5g_up"] ? 1 : 0);          if(r["5g_txpwr"] != "0")             cmdstr += ">txpwr="+r["5g_txpwr"];                  /* AP属性 */         if(r.cloudsw != "")             cmdstr += ";pappiw>cloudsw>sw=" + r.cloudsw;          cmdstr += ";pappiw>reload";         cmdstr += ";pappiw>setifrate>src=eth>type=WAN>uppps="+ r.mca_tx +">dwpps=" + r.mca_rx;          if(r.lanvlan != "")             cmdstr += ";pappiw>lanvlan>vlan=" + r.lanvlan;                  cmdstr += ";pappiw>reload";                  pa_confirm('{{ lang031[g_lang] || "确定要提交吗" }}？', function(index){             layer.close(index);             pa_ajax({                 url: api,                 data: {"action": r.action, "tmpl_id":r.tmpl_id, "tmpl_name": r.tmpl_name, "cmdstr": cmdstr},                 success: function(json){                     if(json.code != 0) {                         alert_err(json.msg);                     } else {                         layer.closeAll();                         alert_ok(json.msg);                         $("#submit_tmpl_search").click();                     }                 }             });         });     };       /* 页面初始 */     form.render();      select_2g_phymode = pa_select({         el: '.select_2g_phymode',         tips: 'WiFi 5、WiFi6',         max: 2,         data: [             {name: '{{ lang008[g_lang] || "不配置" }}', value: 'auto', selected: true},             {name: 'WiFi5', children:[                 {name: '11B', value: '11b'},                 {name: '11G', value: '11g'},                 {name: '11NG-HT20', value: '11ng_ht20'},                 {name: '11NG-HT40', value: '11ng_ht40'},             ]},             {name: 'WiFi6', children:[                 {name: '11AXG-HE20', value: '11axg_he20'},                 {name: '11AXG-HE40', value: '11axg_he40'},             ]}         ]     });      select_5g_phymode = pa_select({         el: '.select_5g_phymode',         tips: 'WiFi 5、WiFi6',         max: 2,         data: [             {name: '{{ lang008[g_lang] || "不配置" }}', value: 'auto', selected: true},             {name: 'WiFi5', children:[                 {name: '11A', value: '11a'},                 {name: '11NA-HT20', value: '11na_ht20'},                 {name: '11NA-HT40', value: '11na_ht40'},                 {name: '11AC-VHT20', value: '11ac_vht20'},                 {name: '11AC-VHT40', value: '11ac_vht40'},                 {name: '11AC-VHT80', value: '11ac_vht80'}             ]},             {name: 'WiFi6', children:[                 {name: '11AXA-HE20', value: '11axa_he20'},                 {name: '11AXA-HE40', value: '11axa_he40'},                 {name: '11AXA-HE80', value: '11axa_he80'},                 {name: '11AXA-HE160', value: '11axa_he160'},             ]}         ]             });       /* 加载SSID，用于检查重复 */     pa_ajax({         url: '/cgi-bin/sac/ajax_sac_ssid',         data: {"action": "load_ssid_list"},         success: function(json){             l_ssidList = json;         }     });           /*      * edit: 来自模板页面，表格行内编辑     * view: 来自AP页面，查看模板详情     */      if(l_parent_data.action == "edit_sac_tmpl"){         render_page_data({             "tmplcmd": "{{- d.tmplcmd }}",             "tmplid" : "{{ d.tmplid }}",             "tmplname":"{{ d.tmplname }}"         });     } else     if (l_parent_data.action == "view_sac_tmpl") {         layer.load();         pa_ajax({             url: api,             data: {"action": "load_tmpl_list"},             success: function(json){                 var tmplobj = {};                 layer.closeAll("loading");                 layui.each(json.data.tmpl, function(index, elem){                     if(elem.tmplid == "{{d.tmplid}}"){                         tmplobj = elem;                         /* get tmpl bind group */                         l_parent_data.grp = [];                         var grp = json.data.dict["tmpl_"+elem.tmplid].split(",");                         for(var i = 0; i < grp.length; i++){                             if(grp[i] == "") continue;                             l_parent_data.grp.push({                                 'grpid': grp[i],                                 'grpname': json.data.group[grp[i]].grpname                             });                         }                     }                 });                 render_page_data(tmplobj);             }         });     }       /* 事件绑定 */     $("#btn_select_ssid").on("click", btn_select_ssid);      $("#btn_add_ssid").on("click", function(){         tmpltab_add_ssid("", "add");          form.on('select(select_ssidamode)', function(obj){             var type = obj.value;             var index = obj.elem.getAttribute("name").split("_")[1];             var keyobj = $("input[name=ssidKey_" + index + "]");             if(type == "open") {                 keyobj.attr("readonly", "");                 keyobj.addClass("layui-disabled");             } else {                 keyobj.removeAttr("readonly");                 keyobj.removeClass("layui-disabled");             }             form.render();         });     });      form.on('submit(submit_addtmpl)', function(obj){         addtmpl_submit(obj.field);         return false;     });  }); </script>